Lucent Technologies CentreVu User Manual Download Page 128

Page: 128 / 198

Completing Your Custom Report

CentreVu CMS Custom Reports

Test Design Error Messages

5-10

If you have no errors, press the

SLK and continue with your design, or

save the design and exit the Screen Painter.

Test Design Error Messages

Test design error messages are divided into three categories:

●

Phase 1 Error Messages (detected before the sample input screen
appears)

●

Phase 2 Historical Error Messages (require the sample input before
occurring)

●

Phase 2 Real-Time Error Messages (require the sample input before
occurring).

Phase 1 Error
Messages

This section contains Phase 1 error messages.

Table 5-1

lists the messages

alphabetically, and includes a cause and a recommended solution for each
message.

3. If you have errors, then do the following:

●

Note the errors

●

Press the

SLK

●

Fix any errors

●

Select

Test design

again

●

Repeat Steps 1 and 2.

Exit

Note

For real-time reports the link to the switch must be up for the
current ACD, and there must be data for the particular item you
are selecting, such as Split 5.

Exit

Table 5-1: Phase 1 Error Messages

Message:

$<variable name> not defined

Cause:

The “where” clause contains a variable that is not defined.

Solution:

Define the variable using the define input action or remove
the variable from the row search criteria.

Message:

Cannot mix aggregates and nonaggregates in

the select

Summary of Contents for CentreVu







































































































































































































Search results

Summary of Contents for CentreVu

Reviews:

Related manuals for CentreVu

Brands by name

Popular brands

Lucent Technologies CentreVu, User Manual

Search results

Summary of Contents for CentreVu

Reviews:

Related manuals for CentreVu

Brands by name

Popular brands