Lucent Technologies CAJUN P120, User Manual

Page: 66 / 130

Chapter 6 Legacy CLI (Command Line Interface)
52 Cajun P120 User’s Guide
Groups, Parameters and Default Settings
This section provides all the CLI parameters and their default values. Not all groups,
parameters and commands are available when the Cajun P120 boots up from its
INIT software.
How Groups are Organized - Finding Parameters
All parameters are divided into groups of related parameters. Since parameters
within a group are interrelated, you cannot change a single parameter within a
group.
Table 6.5 Parameter Summary
Configuration
Topic
Group Name Used for Setting
See
Page
MIB-II System MIB-II SYST MIB-II System 53
CAM
Configuration CAM CAM software 53
IP Configuration IP IP and SLIP addresses 54
IP-Multicast
System Group IP-MULTICAST IP-Multicast configuration 55
Spanning Tree
STA-GEN General spanning tree parameters 57
STA-PORT Port spanning tree parameters 58
P120 Port
Configuration P120 Cajun P120 Base port settings 59
Expansion Module
Configuration X120xx Cajun P120 Expansion module port
settings 62
Agent VLAN
Configuration VLAN Agent VLAN 63
Port Mirroring COPY-PORT Source and destination ports
(mirroring) 63
TFTP
Configuration TFTP TFTP parameters 64
SNMP
Configuration SNMP SNMP communities and trap
managers 65