Lucent Technologies CAJUN P120, User Manual

Page: 47 / 130

Chapter 6 Legacy CLI (Command Line Interface)
Cajun P120 User’s Guide 33
Note:
1) After entering a value, you cannot go back and change it at this time. You must
either complete the setup command or break the setup command with Ctrl-Q.
Then re-enter simple-setup or use the set command for a specific
group/parameter.
2) If keyboard activity is not detected for 10 minutes, then you are automatically
removed from the simple-setup command and Privileged level. Any changes
you have made are lost. You can re-enter the simple-setup command.
The next parameter displays automatically.
setup> def-gateway [0.0.0.0]?
You may now set the Cajun P120’s default gateway IP address. Either:
• Keep the default setting by pressing Enter, or
• Type a new value and press Enter. For example, to change the IP address,
enter:
194.90.121.1
The next parameter displays automatically.
setup> bootp-mode [never]?
You may now set the Cajun P120’s Bootp mode. Either:
• Keep the default setting by pressing Enter, or
• Type a new mode and press Enter. The possible values are:
— once – Attempts to configure parameters from the Bootp client server when
the Cajun P120 is powered on. Once Bootp is successful, then the setting is
automatically changed to ’never’.
— always – Attempts to configure parameters from the Bootp server each time
the Cajun P120 is powered on.
— never – Does not attempt Bootp.
For example, to stop the bootp process, enter:
never.
Note: We recommend that you set the bootp-mode to
never.
The next parameter displays automatically.
setup> slipip [192.168.10.1 255.255.255.0]?
You may now set the Cajun P120’s SLIP address. Either:
• Keep the default setting by pressing Enter, or
• Type a new value and press Enter. For example, to change the IP address,
enter:
194.90.120.2 255.255.255.0
The next parameter displays automatically.
setup> slip-peer-ip [192.168.10.2]?