Remote Port Security Device
User’s Guide
555-024-402
Issue 1
October 1996
Key Administration and Use
Page 4-3
Initialization Functions
4
Initialization Functions
As the name suggests, initialization fuctions are those you use to set up an
uninitialized Key. The commands are:
■
U—Set User ID
■
K—Set Secret Key
■
N—Set Device Number
U—Set User ID
Syntax and Parameters
u<user_id>
Description
Use the Set User ID command to enter a name that will identify the RPSD Key to
the RPSD Lock. Use this command only when initializing a previously
uninitialized Key.
To use this command, enter
u<user_id>
. The user ID entered must match
the user ID programmed into the Lock to identify that Key. If you assign the same
user ID to more than one Key, assign different device numbers to those Keys.
Sample Command and Response
> u KEY20
08/14/90 14:00:01 User D set to KEY20
Parameter
Description
u
The Set User ID command
<user_id>
An alphanumeric identifier of up to ten
characters
ENTER
ENTER