ISDN DEFINITY
Extender 2300EU/2100EU
10
Quick Configuration
Introduction
This section provides step-by-step procedures to
configure your Switch Module.
Configuring
and
Installing the
Switch
Module
Ensure that you have the Switch Module (module is
labeled ‘Switch Module’ on the cover) before proceeding.
To configure and connect your ISDN DEFINITY
Extender, Models 2300EU and 2100EU, see Figure 1:
Figure 1. Switch Module Back Panel
1.
Plug the Switch Module port (labeled
PHONE/SWITCH on the Module back plane) into
the DEFINITY
ECS using the RJ45 cable.
2.
Plug the Switch Module ISDN interface (labeled
ISDN) into the ISDN line provided by the
DEFINITY
ECS or your service provider using the
RJ45 cable.
3.
Plug the male DB9 end of the RS232 cable into the
Switch Module connector (labeled RS232) and the
other end of the RS232 cable into a PC running a
terminal emulation program or a terminal.
Continued on the next page…
PHONE/
SWITCH
RS-232
ISDN
+12VDC
