ISDN DEFINITY
Extender 2300EU/2100EU
20
Configuring Using a Terminal
Setting DN2
The second DN should be paired with SPID2. Follow
these steps to set the second Directory Number:
1.
Select 1 for “Configure ISDN” from the Main
Menu on the terminal emulation program to reach
the ISDN parameter menu.
2.
Select 5 for “Set DN2” from the Configure ISDN
menu.
If a previous DN2 number was stored, the display
shows that number. If no DN2 number was stored,
the display is blank.
3.
Enter the second DN for the Switch Module, up
to 15 digits in length.
4.
Press Enter to accept the change.
You automatically return to the Configure ISDN Menu.
To save your changes if you are finished programming,
Exit from the Configure ISDN Menu. Type “Y” at the
system prompt to save your changes. Type “N” at the
system prompt to discard your changes.
