pg. 7
Mifare Card Reader
If you have the Mifare Card Reader LTH-M201-MCR, each camera module can add up to 10,000 13.56MHz Mifare Cards or key fob.
The card reader is pre-program with 34bit. So, it only can read the 10 digits code from the cards or the key fobs.
To program it is the same as the Access Control programming in the NVMSv3 software.
You need to program the
Person
&
Access Group
at least.
Program Person & Card:
1. Click the Main Menu icon
2. Open Person icon.
Adding Person & Card:
Follow these steps in the picture.
For the first time the (4) window pop-up, you need to
define the card reader reading from. By default, it read
to the PC USB LTK100ME card reader.
If you want to read it from the Intercom M201-C, you need to select the Remote > Camera Module. Then, Press read button (5)
If you want to input the card number manually, you just input it in the field with 10 digits. Then, (6) (7)
Program Access Group
(Access Group aka Permission)
Go to
Follow these steps in the picture.
When you define the name (3), please use an easily understand title. That
should help you to remember the original purpose.
(4) drag the person into the list.
(5) drag the door into the list;
open when these cards scanned.
Apply Changes to Device
to the Intercom
When finished, make sure to check the Apply Status to confirm success.
