pg. 6
NameTag
Unlock Door with Password Setup
Define NameTag & Call to Indoor Station
In the Remote Configuration, you can define the M201-C
Main Module NameTag button where it calling to.
The room number is the Indoor Station Room No.
About the 6 NameTag module define:
You can find it from
Intercom
>
Sub Module
Keypad Module Programming
This programming is only required if the customer wishes to unlock the door
using either a universal password or a password specific to each room.
Universal passwords can support up to 3 profiles, also can be changed by going
into remote configuration for the M201-C and navigating to
Intercom
->
Permission Password
.
6-digit codes
can be assigned to unlock the door for
public1,
public2,
public3.
Each indoor station which directly connected to the Master
Outdoor station that can support with 1 extra unlock
password. You need to use Indoor Station Room number with
the password to unlock the door. To program this, you need
go to the Indoor Station D301GY Remote Configuration in the NVMSv3.
Intercom -> Permission Password
.
Choose “Unlocking Password” in the Password Type.
The Old Password is initially set to 123456
and you can create a new room unlock password as you see fit.
See how to unlock the door with the password in Page 4.
