Piccolo
62 from 82
www.lt-light.com
Piccolo takes some seconds to read the USB stick. Please wait.
Important: Always store your show to a USB-Stick as Backup!
37. MENUS
Press
[MENU]
to open the menu list. Select the desired menu by entering the index number (or to
cross them with the arrow keys and then, when the desired menu is selected, press [
ENTER
]).
Following all the menus and their possibilities will be explained, except for menus that, for their
importance, have been explained in dedicated chapters:
37.1. PATCHS
37.1.1. Dimmers (02) & Fixtures (04)
Check chapter DIMMER PATCH, page-56 & FIXTURE PATCH, page-56.
37.1.2. Dmx In (03)
Trough the DMX input it is possible to manipulate channels control (option
0
) or fixtures (option
3
), to execute macros where channel 1 starts macro 1, channel 2 macro 2, and so on (option
2
) or
mix the input line with the console output, as a sum of both lines to the DMX OUT port as a merge
(option
1
).
There are options to limit the channels numbers read from the DMX input (
Permitted
Inputs
), and to configure
SM
:
0: As general control of Submasters
1: As general control for DMX input
2: As general control for dimmers set as SM.D or auditorium lights
3: As none
To work with the DMX input this port has to be enabled: (
Status
…
ENABLE
)
Note: There are several conversion tables for the reading of the DMX input line (
CONVERT
).
37.1.3. Autogroups (07)
It allows to you to create several basic groups, autogroups, using the patch data. Autogroups are:
For fixtures: A group is created by each fixture type, including all fixtures of type.
For channels: 3 groups more, one with all channels, other with the odd, and other with the even.
Inside this menu (
07
) we can select that groups you will want and set their number of the first
group to record for fixtures & channels:
Summary of Contents for Piccolo 12
