LT Piccolo 12, User Manual

Page: 38 / 86

Piccolo

38 from 82
www.lt-light.com
Active [ LIBs ], its LED is lit.
- Press [POS] [#] [REC] to store the position library nº #.
- Press [OPTIONS] to name the stored library.
- Note that the LED of the bank key corresponding to the new stored library is lit to
indicate that the library is accessible.
To apply libraries it’s needed to active [ LIBs], its LED at on. And, to use any of these commands:
a) {fixtures selection} [ COL] {press the Bank key to apply its library}
Example: [FIXTURE] [1] [DIM] [B_1] [COL] [B_3] [GOB] [B_1]
b) {select fixtures} [COL] [#] [ENTER] to apply the library.
c) {fixtures selection} [COL] [@] (open a option red window) [#] [ENTER] to apply the
library.
On the monitor:
Number of DIM libraries, applied over some parameters, are showed in a magenta field . Their texts
are showed in red (
).
Number of libraries of POS, COL, GOB, BEAM & XTRA, applied over their corresponding
parameters, are showed in a blue field. Their texts are showed in red. (
).
Over channels only the library number is showed.
Libraries are real references, in other words, each cue or group that is edited using libraries, it maintains this
library value as reference, in this way you can modify the library to modify each cue and group that includes
this library.