SETTING SYSTEM PARAMETERS
System parameters (system code, channels for the network devices...) can be set as follows:
The
[Edit system settings]
window permits to select and edit the following system parameters:
The
Save
option when preceded by an arrow, permits you to save the changes made:
[System code]
This is the system identification number. Values range from 1 to 254.
[Net Channels]
Here you can select the network channel pair. Standard pair values are found in appendix A at the end of the
manual.
[External jamming]
Display Only
: when external radio jamming occurs, the event is notified only on the display.
Generate Fault
: when external radio jamming occurs, the event is notified to the control panel.
[Legacy mode]
Yes
: the control panel does not use the Vega protocol
’
s extension commands for Taurus systems.
No
: the control panel uses the Vega protocol
’
s extension commands for Taurus systems.
[Tone period [s]]
Timespan value used for the purpose of synchronizing the output of the sounders. Refer to the tables in appendix
C to obtain the correct value to insert in this field. Values range from 1 to 7.
[Edit password]
Password view
: you can edit the numeric password value for viewing the settings of the device. Values range from
0000 to 9999.
Password edit
: you can edit the numeric password value for changing the settings of the device. Values range
from 0000 to 9999.
Sys: 037
N: 09/45
F: 55/25
TM
-
W2W
Please enter password
0001
[Main Menu]
System Config
[System Config]
System Settings
[System Settings]
Edit system settings
Please enter password
0002
[Edit system settings]
...
[Edit system settings]
Save
Update completed
Press back to exit
Saving setting
’
s changes may require
some further programming or linking
actions, as requested by the device.
6
