ADDING AND LINKING DEVICES
In order to add one or more devices to the Taurus system, perform the following steps in sequence:
1)
Add one or more virtual devices to the system.
2)
Link the real device or devices to the system.
ADDING A VIRTUAL DEVICE
To add a device:
The
Select Exp. By Num.
and the
Select by Loop Address
options permit you to select a specific network device (central node included).
You will use one of the following two windows:
then:
Sys: 037
N: 09/45
F: 55/25
TM
-
W2W
Please enter password
0001
[Main Menu]
System Config
[System Config]
Device Settings
[Device Settings]
Add Device
Please enter password
0002
[Add Device]
Select Exp. By Num.
Select by Loop Address
Select Exp. By Num.
The required network device is searched through its sequential number (1 to 16).
Select by Loop Address
The required network device is searched through its intelligent loop address.
Select expander
Expander:1
MGGG0000 Children: 0
Select loop address
Address: 1
MGGG0000 Children: 0
If [Legacy mode] is NOT activated, the
FI750/RF/WE
have
their own loop address; therefore,
Select by Loop Address
can be used to fetch them. On the other hand, if [Legacy
mode] is activated, only the
FI750/RF/W2W
device can be
fetched using
Select by Loop Address
.
[Set device params]
...
11
