LINKING A REAL EXPANDER
-
AUTOLEARN / DISCOVERY
Second and last step for adding a
FI750/RF/WE
is the
“
Autolearn / discovery
”
operation.
The real device (or devices) will be effectively linked to the system:
The last window requests you to select the wireless channel that will be used for this
“
Autolearn / discovery
”
operation.
You can select channel A, B or C.
Use the less congested one. If channel A gives problems then use channel B; if channel B gives problems then use channel C.
It is suggested you use the survey kit for Taurus systems (
FI750/RF/MK
) to find out which of the three channels is freer.
The
“
discovery channel
”
you set here must be the same
“
discovery channel
”
you set on the other
FI750/RF/WE
devices.
Made the
“
discovery channel
”
selection press
Enter
:
It is suggested to select
Yes
that requires mandatorily a backup route for the wireless messages to and from every single
FI750/RF/WE
and the
central node. Press
Enter
.
You are now requested to set all involved
FI750/RF/WE
in
“
Discovery mode
”;
refer to
FI750/RF/WE
’
s interface guide for this procedure.
Set all involved
FI750/RF/WE
s in
“
Discovery mode
”.
Press
Enter
.
Sys: 037
N: 09/45
F: 55/25
TM
-
W2W
Please enter password
0001
[Main Menu]
System Config
[System Config]
Expander Settings
[Expander Settings]
Network AutoLearn
Select the channel:
A
The
“
discovery channel
”
you
set here must be the same
“
discovery channel
”
you set on
the other
FI750/RF/WE
devices.
Is network 2nd path
Yes no
discovery required?
Ensure every expander
start discovery
is in discovery mode,
then press select to
Set all involved
FI750/RF/WE
s in
“
Discovery mode
”.
Please enter password
0002
21
