LSI LASTEM M-Log – User’s manual
15
For all M-Log releases the modification of configuration, in order to obtain new setup satisfying
with one’s own needs, is made through PC connected to serial communication port 1 with
3DOM
program; the serial port 2 (model ELO007 excluded) can be used for configuration upload only
when it is configured to use CISS protocol
.
. For details about all settable parameters, make
reference to online help of this program or user manual DVDs made by LSI LASTEM. For
connection of serial line and its programming, see §
Errore. L'origine riferimento non è stata
trovata.
.
During the configuration data upload (by means of the
3DOM
program) the survey (in progress in
the instrument) is closed, in order to allow to the instrument the right reconfiguration condition. At
this point the measures list on the display (see §
Errore. L'origine riferimento non è stata
trovata.
) is replaced with the notice “Survey halted”; it means that the survey has been halted.
Note
: when programming a new configuration, all data stored in the instrument's memory will be
deleted. For this reason we advise to receive on PC all data from the instrument before uploading
the new configuration.
3.4.1
Language configuration
The instrument always uses English language for display messaging; for measurement texts it is
factory programmed to use Italian names but this can be changed by 3DOM configuration program.
