![background image](http://html1.mh-extra.com/html/lsc/gen12-10a/gen12-10a_user-manual_1943946028.webp)
Gen VI Dimmer
User Manual
Page 28
.
The “Auto Power” pane has 2 buttons,
•
Press
Disable
to disable the Auto Power function. The button then changes to
Enable
. This is a
global setting for all channels that have their control source set to “Auto Power”. See below for
details on how to set a channel to “Auto Power”
•
Press
Hold Time
and enter a time from 1 to 60
minutes. This is the time that the “Auto Power”
channels will stay ON after the DMX signal is lost
5.8.5
Auto Power Mode
To set a channel to
operate in “Auto Power” mode you must first set the channel to “TruPower” mode
and then set
its “Control Source” to “Auto Power”.
•
To set a channel to “TruPower” mode, from either home screen select
Config
,
Dim/TruPower
”
Press a channel number to toggle its mode
between
“Dimmer” mode and “TruPower” (switch)
mode.
A dark grey button indicates TruPower mode as shown in the “Legend”. Press
Save
.
•
To set a channel to “Auto Power” mode, select
Config
,
Channels
, select the channel
number(s) then select
Edit
and use the “Parameter Selector” buttons to select the
Source
parameter.
Dimmer mode.
Light grey
TruPower mode.
Dark grey
Legend
Auto
Power