LSC GEN12/10A, User Manual, Page: 29 / 49

Gen VI Dimmer User Manual
Page 29
Once “Source” is selected, the choose
Auto Power then select Apply .
5.8.6 View Input
The “DMX Setup” menu allows you to view the channel levels on the DMX input. To view the DMX
input press
Config, DMX, View Input .
Press either
> or > to scroll through all slots in the DMX Universe.
5.9 Set DMX Term
Selecting Config , Set DMX Term On/Off switches the internal DMX termination switch On or Off
respectively. See section 8 for more details on DMX.
5.10 Channels Menu
Selecting Config , Channels provides menus for configuring the following parameters for each
channel,
•
Min. Minimum Level
•
Max. Maximum Level
•
Curve. The choices are: S curve diming, L (Linear) dimming, TruPower or Custom curve
dimming
•
Source. The control source for the channel. The
choices are: “DMX only” and “Auto Power”
(Auto Power turns the channel On whenever a DMX signal is present)
The screen shows the settings for the first 6 channels. Use the < or > buttons to see the other groups
of 6 channels. The navigator in the top right of the screen shows the selected group highlighted.
Navigator shows
current group of 6
selected channels
highlighted
Parameter
Selector
Parameter
Selector
“ Source” Parameter