LS tractor MT342, Operator'S Manual, Page: 213 / 264

5 - 33
(4) Checking Front axle oil
 Stop the tractor on a level surface and apply the
parking brake and lower the implements to the
ground.
 Clean around the oil gauge and oil filling inlets.
 Open the oil gauge and check if the oil level is
marked between “Maximum” and “Minimum”
marks on the oil gauge.
 If necessary, add new oil into the oil filling inlet
after removing the oil check port plugs on both
sides.

For oil specification, see chapter 5-3, “Lubricants
and Capacity” or the last page in this manual.
Oil filling inlet
& Oil gauge
Oil check port &
oil filling inlet
(3) Checking Transmission oil
 Stop the tractor on a level surface and apply the
parking brake and lower the implements to the
ground.
 Clean around oil filling inlet and pull the gauge
straight out.
 If oil level is between “Min” and “Max” marks of
oil gauge, it means ‘Proper amount’.

For oil specification, see chapter 5-3, “Lubricants
and Capacity” or the last page in this manual.
▶
Contaminated oil may reduce the durability of power drive lines and it can cause a
failure of the transmission and hydraulic system. Clean around the oil filling inlet
before opening the oil gauge.
Caution
<Oil gauge >
Max.
Min.
Oil filling inlet,
Oil gauge
(5) Battery check

Refer to the chapter 5-15-(3), “Batter handling and Notices” in this manual. (See page 5-53)
(6) Air cleaner (Dry type)

Refer to the chapter 5-6-(6) in this manual (See page 5-24).
▶ Contaminated oil may reduce the durability of power drive lines and it can cause a
failure of the front axle. Clean around the oil filling inlet before opening the oil gauge.
Caution