LS tractor MT342, Operator'S Manual

Page: 201 / 264

5 - 21
5-6. Check before starting (Daily check)
(1) Engine oil
 Oil specification and capacity :
See chapter 5-3, “Lubricants and Capacity” or
the last page in this manual.
 Checking engine oil level
- Check the engine oil level before starting
engine or at 5 minutes later after stopping
engine.
- Check if the oil level is between MAX and MIN
marks of the oil gauge. If necessary, add new oil.
- It must only be checked while the engine is
stopped.
- If your engine is operated in dusty/dirty
condition, the service interval must be shorter
than normal condition.
- Must replace the engine oil and engine oil filter
after the first 50 hours of use.
Engine oil gauge
Oil gauge
Oil filling inlet
Wheel bolts and
tightening of
each part
Brake, Clutch
operation
Amount of
engine coolant
Damage of Headlights,
Turn signal lights,
Horn etc.
Fuel
amount
Cleanness of
radiator screen
Amount of
Engine oil
Operation
of
Indicators
Tire air pressure
and damage
Condition of air
cleaner primary
element
 Before starting engine, check the followings carefully to avoid any failure or damage.