LS tractor MT342, Operator'S Manual

Page: 104 / 264

3 - 28
(20) ESC main switch (Roll-bar,
HST models only)
ESC main switch
 This switch is used to adjust the engine speed
for ESC when the ESC is working.
 If pressing the front/rear side of the switch, the
engine speed will be;
- Front side : Increased.
- Rear side : Decreased.
(21) ESC speed up/down switch (Roll-bar, HST models only)
ESC speed up/down switch
• Position 2 : Resume
• Position 1 : Ready
• Position 0 : Off
ESC indicator
LCD panel
1

This switch is used to enable the Engine Speed
Cruise Control(ESC) function.
 If pressing the ESC main switch from position 0
to position 1 ( Off –> Ready ),
- ESC indicator on the instrument panel will be
blinked.
- Engine speed
①
stored on ECU will be
displayed on the LCD panel.
 If pressing the ESC main switch from position 1
to position 2 (
Ready –> Resume ),
①
(if pressing below 2 second) – ESC
indicator will be ON and engine speed cruise
control (ESC) will begin.
②
(if pressing over 2 second) – Current
engine speed will be stored on ECU and the
stored engine speed
①
will blink 3 times on the
LCD panel.
 To exit the ESC control,
-. Press the lower side (“Off position”) of the
ESC main switch or
-. Press down the brake pedals.