77
Basic and advanced features
A
d
van
ced
O
p
e
rati
on
Feature
Description
Page
configuration at the
multifunction terminals
times for a motor based on defined parameters at the
multifunction terminals.
Acc/Dec pattern configuration
Enables modification of the acceleration and
deceleration gradient patterns. Basic patterns include
linear and S-curve.
Encoder error detection
configuration
Configures the inverter to detect hardware encoder
errors.
Encoder software error
detection configuration
Configures the inverter to detect acceleration errors
during the operation due to connection changes
between the encoder and motor.
Output voltage adjustment
Adjusts the output voltage to the motor when the power
supply to the inverter differs from the motor’s rated input
voltage.
Accelerating start
Accelerating start is the standard motor starting method.
Typically, motors accelerate to a target frequency in
response to a run command. Other start or acceleration
conditions may also be defined.
-
Deceleration stop
Deceleration stop is the standard stopping method for
motors. After receiving a stop command, the motor
decelerates to 0 Hz and stops. Other stop or
deceleration conditions may also be defined.
Free-run stop
Configures a stop command that stops the inverter
output to the motor. The motor will free-run, slow down,
and then stop.
Reverse the multifunction
terminal input
Reverses the input terminal position from Form A
contact to Form B contact.
Multifunction input terminal
time
Configures the input terminal time constant to improve
tolerance to electronic interference.
-
Reversing the multifunction
terminal output
Reverses the output terminal from Form A contact to
Form B contact.