Page 12-14
T7501
Using The KeyCall
Starter Unit
The Starter Unit is located near the starting point of a transaction. After an order
is placed, insert the Key into the Starter Unit, observe beginning of Elapsed Time
on the Orders window with order number.
Clearing Unit
The Clearing Unit is located near foo
d pickup area. After a patron‘s order has
been delivered and Key retrieved, insert the Key into the Clearing Unit to confirm
completion of the transaction.
Service Button
Alerts the Server by sending a page that a Table requires assistance. This will
also cause the LEDs at the top of the KeyCall unit to flash.
There is a one-minute time limit between signals sent to the Server pager when
the button is pressed to reduce unnecessary requests.
Key Holder
Each KeyCall has four spaces (two on each side) to store Keys.
The KeyCall Keys
Programming Key
The Programming Key is used when assigning KeyCall‘s to the T7501.
Order Keys
The Numbered Keys are given to patrons after their order is placed. The number
is used in tracking the location of the customer when they sit down at a table.
Summary of Contents for T7501
