P a g e 6 | 36
LPS-Lasersysteme Siegmund Ruff / CEO Haidschwaerze 18 72131 Ofterdingen Germany
Phone: +49 7473 271177 www.lps-laser.de [email protected]
If the device is operated in any way different to the one described in this manual, the product may
suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to
dangers like short circuit, burns, electric shock, etc.
1.5
Unpack and Connect
Check the content of the package of its completeness.
The following parts are included:
-
Laser system
-
Manual
-
Power plug (1 piece)
-
Key for laser system
-
Emergency strapping plug
-
SD Card
Please read the chapter „Laser Safety“ precisely and conscientiously before you connect the system.
The system is working from 100 V to 240 VAC. Make sure that the current entry is provided.
Connecting the system is rather simple:
-
Connect the D/A converter and laser system with the data cable
-
Plug in the power supply of the laser system and the D/A converter (power plug).
-
Make sure that the show laser system is mounted stable an cannot fall down.
Important note
By reasons of the laser- and operating safety, the current supply of the system has to be
lockable by an Emergency-OFF-Button. To operate without an Emergency-OFF-Button IS
NOT ALLOWED. There are already prepared connections for the Emergency-OFF-Button
inside the switch box of LPS-Lasersysteme.
Please note in the attachment the circuit diagram for the voltage supply in combination
with the Emergency-OFF-Button.