P a g e 29 | 36
LPS-Lasersysteme Siegmund Ruff / CEO Haidschwaerze 18 72131 Ofterdingen Germany
Phone: +49 7473 271177 www.lps-laser.de [email protected]
8.
Autoplay
For autarkic replay of a laser show, without a computer, DMX controller or similar, your SimPlex
850RGB has a operation mode available.
8.1
Activation of the auto play modes
1.
Switch on the laser system.
2.
Press the menu encoder for 2 seconds.
3.
Select the pint MODE in the main menu.
4.
Select the mode “Built-in show”.
5.
Select one of the three shows by turning the menu encoder.
9.
Animation Mode
SimPlex laser systems also in animation mode without computer, DMX controller or similar can be
operated in addition to the auto play modes. Only the supplied SD card in the device is to insert. In
animation mode, graphical animation chains can be selected and issued by category. As also in the
DMX mode, a distinction is made between PRG - and ILD mode. In IB mode, individual animations
within a category can be selected while in PRG mode all animations of a category are issued one after
the other.
9.1
Activation of the animation mode
1.
Make sure that the delivered SD card is inserted in the laser system.
2.
Switch on the laser system.
3.
Press the menu encoder 2 seconds long.
4.
Select the point MODE in the main menu.
5.
Select the mode “ILD show”.
6.
Scroll down and select “Exit” to leave the menu.
7.
Open a folder of animation via the menu encoder and then one of these animations.