68
HOW TO ERASE A SONG
1.
Insert the disk containing the song you wish to erase
into the Disk Drive.
2.
Press the Song button, located below the Information
Center window. The Accomp and Upper buttons light
up solid Green.
3.
Press either Scroll button to display the song title from
the disk to be erased in the Information Center window.
4.
Press the Erase button to erase the song contents in
the Accomp and Upper tracks for the song title
displayed in the window. The Erase, Accomp, and
Upper buttons turn solid yellow.
5.
Press Play Pause. The Accomp and Upper flash on
and off green, indicating the Accomp and Upper tracks
are empty and ready to accept a new recording.
To erase just the Accomp or Upper track of a song, so that you can record that section again, fol-
low the above procedure to step 4. Before pressing the Erase button in step four press the light-
ed track button (Accomp or Upper) that you DO NOT wish to erase. The lighted track button
will turn off. Proceed to step 5.
NOTE: The song title remains on the disk. To delete the song title from the disk use the Delete
Song feature (page 44).
MERGE RECORDING
Merge Recording allows you to record music onto a track (Accomp & Upper) that already has
music recorded on it, creating multiple layers of recorded music.
The Accomp and Upper tracks actually contain two separate sections; each for recording. The
separate sections on each track are automatically merged when a recording is completed. As
each additional recording is made the previously recorded tracks are merged onto the first sec-
tion of the track; allowing numerous recordings to be layered on a track.
1.
Record a song or select a song previously recorded on a disk. The song title should be
displayed in the Information Center window. The Accomp and Upper buttons will light up
solid green.
2.
Press the Record button. The Record button turns on solid red. The Play Pause button
flashes on and off red and the metronome begins to call out the tempo.
3.
Press both Accomp and Upper buttons to add another recording to the existing recording.
You may also elect to press only the Accomp or only the Upper to place additional music
on either track only. The button(s) pressed will turn from solid green to flashing red.
