54
How To Use It:
To increase the volume press the top Orchestral Volume button. To decrease the volume press
the bottom Orchestral Volume button. It may be necessary to tap either button several times to
achieve the desired level.
The column of red and green L.E.D.’s to the left of the buttons visually illustrates the volume
level of the Orchestral section. All L.E.D.’s illuminated red indicates full volume. After setting the
Volume you will use your right foot on the Expression Pedal to raise and lower the volume of the
entire organ while you play.
SOLO VOLUME
What It Does:
Solo Volume control raises and lowers the volume of the Solo
sounds.
How It Works:
The Solo Volume control is two blue colored buttons located on the
right side of the Solo section. Solo Volume is factory set. Each time
you select a Solo sound, press a General Preset or Rhythm Preset
that uses a Solo sound, the Solo Volume level is set to a predeter-
mined factory setting.
How To Use It:
To increase the volume press the top Solo Volume button. To
decrease the volume press the bottom Solo Volume button. It may
be necessary to tap either button several times to achieve the
desired level.
The column of red and green L.E.D.’s to the right of the buttons visually illustrates the volume
level of the Solo section. All L.E.D.’s illuminated red indicates full volume. After setting the
Volume you will use your right foot on the Expression Pedal to raise and lower the volume of the
entire organ while you play.
ORCH GENIUS
What It Does:
This feature allows you to assign any of the 25 Genius sounds (list-
ed on page 26) to the Orch Genius button.
Press the Orch Genius button. It will light up. The Information
Center window will display the Genius sound that is preset from
Lowrey..
Press the Orch Genius button again, turning it off.
ORCH GENIUS
GUITAR, STEEL
