manualshive.com logo in svg

Lowrance M56 S/Map, Installation And Operation Instructions Manual

The Lowrance M56 S/Map is a top-notch navigation device that comes with a comprehensive Installation And Operation Instructions Manual. This essential manual, available for free download, provides step-by-step guidance on setting up and operating the M56 S/Map. Get yours today from manualshive.com and unleash the full potential of this innovative product.

Share
Download
background image

ii

Fish I.D.

 (Fish Symbols & Depths)............................................... 51

FishReveal

..................................................................................... 52

FishTrack

....................................................................................... 54

Grayline

........................................................................................... 54

Overlay Data ..................................................................................... 55
Ping Speed & HyperScroll

............................................................. 57

Reset Options .................................................................................... 58
Sensitivity & Auto Sensitivity ......................................................... 59
Set Keel Offset .................................................................................. 61
Sonar Color Mode ............................................................................. 62
Sonar Page & Sonar Chart Display Options................................... 62

Full Sonar Chart........................................................................... 62
Split Zoom Sonar Chart................................................................ 63
Digital Data/Chart........................................................................ 63
Flasher .......................................................................................... 64

Sonar Simulator................................................................................ 64
Stop Chart ......................................................................................... 65
Surface Clarity.................................................................................. 65
Zoom Pan........................................................................................... 67

Sec. 5: Sonar Troubleshooting.................................................... 69
Sec. 6: Basic GPS Operations ..................................................... 73

Keyboard ........................................................................................... 73
Power/Lights (Turn Unit On and Off) ............................................. 74
Main Menu ........................................................................................ 74
Pages.................................................................................................. 76

Sonar Page .................................................................................... 76
Satellite Status Page .................................................................... 76
Navigation Page............................................................................ 78
Full Map Page............................................................................... 80

GPS Quick Reference ................................................................... 82

Find your Current Position .............................................................. 83
Moving around the Map: Zoom & Cursor Arrow Keys ................... 83
Selecting any Map Item with the Cursor ........................................ 84
Set a Waypoint.................................................................................. 84
Navigate to a Waypoint .................................................................... 86
Set Man Overboard (MOB) Waypoint ............................................. 87
Navigate Back to MOB Waypoint.................................................... 87
Navigate to Cursor Position on Map ............................................... 88
Navigate to a Map Place................................................................... 90
Creating and Saving a Trail............................................................. 90
Displaying a Saved Trail .................................................................. 92
Navigating Trails.............................................................................. 92
Cancel Navigation ............................................................................ 96

Sec. 7: Advanced GPS Operations ............................................. 97

Find Distance from Current Position to Another Location ............ 97

Summary of Contents for M56 S/Map





































































































































































Reviews:

No comments

Related manuals for M56 S/Map

YachtSafe G31 User Manual preview
G31
Brand: YachtSafe Pages: 4
Cetrek Chartnav 343 User Manual preview
Chartnav 343
Brand: Cetrek Pages: 88
Communica TRACKER T1007 User Manual preview
TRACKER T1007
Brand: Communica Pages: 21
Raymarine Raynav 7000 User Manual preview
Raynav 7000
Brand: Raymarine Pages: 67
Nextar W3 - 3.5 Inch Color Touch Navigation System Manual preview
W3 - 3.5 Inch Color Touch Navigation System
Brand: Nextar Pages: 20
Transplant Computing CF LP GPS User Manual preview
CF LP GPS
Brand: Transplant Computing Pages: 30
Goodmans GNAV12 User Manual preview
GNAV12
Brand: Goodmans Pages: 48
Royal AmeriGo User Manual preview
AmeriGo
Brand: Royal Pages: 80
Coban GPS103-A User Manual preview
GPS103-A
Brand: Coban Pages: 19
Coban GPS105 User Manual preview
GPS105
Brand: Coban Pages: 24
BITREK BI 868 TREK User Manual preview
BI 868 TREK
Brand: BITREK Pages: 23
Garmin GPS 73 Owner'S Manual preview
GPS 73
Brand: Garmin Pages: 14
UniGuard UT06a Manual preview
UT06a
Brand: UniGuard Pages: 3
Perfect-10 Acutrac 22 Manual preview
Acutrac 22
Brand: Perfect-10 Pages: 5
Life Minder EV-07W Programming Manual preview
EV-07W
Brand: Life Minder Pages: 12
NavTour NT-147 User Manual preview
NT-147
Brand: NavTour Pages: 18
VisionTek 86VT User Manual preview
86VT
Brand: VisionTek Pages: 8
PROTRON Caliber P-3600 Install Manual preview
Caliber P-3600
Brand: PROTRON Pages: 4

Brands by name

Popular brands

Load more brands