manualshive.com logo in svg

Lowrance M56 S/Map, Installation And Operation Instructions Manual

Share
Download
Lowrance M56 S/Map Installation And Operation Instructions Manual Download Page 137

131

New Trail

To manually start a new trail, in the Trails Menu, use the 

→

 to make

sure 

N

EW 

T

RAIL

 is highlighted and press 

ENT

|

EXIT

.

Trail Visible/Invisible and Other Trail Options

The name, maximum number of points in the trail, activity, and visi-
bility are all changed on the Edit Trail menu screen. The Active setting
determines whether or not the unit is recording new points for a par-
ticular trail.

On the Edit Trail menu, press 

↓

 or 

↑

 to highlight the section you wish

to change, then press 

ENT

. Make your changes, then press 

EXIT

 to erase

this menu.

Units of Measure

This menu sets the speed and distance (statute or nautical miles, me-
ters), depth (feet, fathoms, or meters), temperature (degrees Fahrenheit
or Celsius) and heading (true or magnetic) units. To change the units:

Press 

MENU

|

MENU

|

↓

 to 

S

YSTEM 

S

ETUP

|

ENT

|

ENT

.

        

Main Menu, left, Units of Measure Menu, right.

To set Units of Measure:

 Press 

↓

 to the desired units, then press 

ENT.

After all the options are set as desired, press 

EXIT

|

EXIT

|

EXIT

 to return

to the page display.

Summary of Contents for M56 S/Map





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands