Lowrance LCX-20C, Operation Instructions Manual

Page: 73 / 200

65
2. The Depth Range Control Scale appears. Press
↑
or
↓
to select a
different depth range. A blue bar highlights the selected range. The
lighter range numbers can not be selected.
3. When the new range is selected, press
EXIT
to clear the menu.
Depth Range - Manual
You have complete control over the range when the unit is in the
manual mode. There are 16 depth ranges, from 5 to 4,000 feet.
To switch to Manual Depth Range:
1. First, turn off automatic depth range. From the Sonar Page, press
MENU|
↓
to
A
UTO
D
EPTH
R
ANGE
|
ENT
.
2. Press
↑
to
D
EPTH
R
ANGE
|
ENT
and the Depth Range Control Scale appears.
3. Press
↓
or
↑
to select a different depth range. A horizontal blue bar
highlights the selected range.
4. When the new range is selected, press
EXIT
to clear the menu.
To turn Auto Depth Range on again:
From the Sonar Page, press
MENU|
↓
to
A
UTO
D
EPTH
R
ANGE
|
ENT|EXIT.
NOTE:
The sonar's depth capability depends on the transducer
installation, water and bottom conditions, and other factors.
Depth Range - Upper and Lower Limits
Virtually any segment of the water column can be displayed by using
the upper and lower limit feature. This lets you pick the shallow and
deep range limits shown on the screen, provided there is at least 10 feet
between the upper and lower limit you select. For example, a range
from 12 feet to 34 feet could be used.
Changing the upper and lower limits gives you far greater control over
the depth range. This feature lets you "zoom in" the display in almost
unlimited combinations. Nearly any segment of the water column, from
the surface to the bottom can be shown. This enlarges the sonar targets
to best suit your fishing needs and water conditions.