manualshive.com logo in svg

Lowrance LCX-20C, Operation Instructions Manual

The Lowrance LCX-20C is a powerful fishfinder with a user-friendly interface. To get the most out of your device, make sure to download the Operation Instructions Manual for free from manualshive.com. This manual will guide you through all the features and functions of the LCX-20C.

Share
Download
background image

v

Port Information ................................................................... 151
Tidal Current Information ................................................... 152
Tide Information ................................................................... 154

Pop-up Help............................................................................... 156
Reset Options ............................................................................ 156
Screen Contrast and Brightness .............................................. 157

Once in the Screen menu: ................................................. 157

Set Language ............................................................................ 158
Set Local Time .......................................................................... 158

Once in the Time Settings menu: ..................................... 158

Show WAAS Alarm................................................................... 159
Software Version Information.................................................. 160
Sounds and Alarm Sound Styles.............................................. 160

Once in the Sounds menu ................................................. 160

Track Smoothing....................................................................... 161
Trail Options ............................................................................. 161

General Trail Options ....................................................... 161

Delete All Trails .................................................................... 162
Update Trail Option.............................................................. 162

Update Trail Criteria (Auto, Time, Distance) ................. 162
Trail Update Rate (Time, Distance) ................................. 162
Specific Trail Options........................................................ 163

Delete Trail ........................................................................... 163
New Trail............................................................................... 163
Trail Visible/Invisible and Other Trail Options .................. 163

Units of Measure....................................................................... 164

Section 9:  Searching ............................................................ 165

Find Addresses.......................................................................... 165
Find Any Item Selected by Map Cursor .................................. 168
Find Interstate Highway Exits ................................................ 168
Find Map Places or Points of Interest (POI) ........................... 171
Find Streets or Intersections.................................................... 172

Find a Street ......................................................................... 172
Find an Intersection ............................................................. 174

Find Waypoints ......................................................................... 176

Section 10: Supplemental Material ................................... 179
Notes..............................................

Error! Bookmark not defined.

Summary of Contents for LCX-20C









































































































































































































Reviews:

No comments

Related manuals for LCX-20C

Haiyang HFF-650 Manual preview
HFF-650
Brand: Haiyang Pages: 53
Furuno NAVNET TZTOUCH2 TZTL15F Manual preview
NAVNET TZTOUCH2 TZTL15F
Brand: Furuno Pages: 3
Humminbird Wide Portable User Manual preview
Wide Portable
Brand: Humminbird Pages: 9
Humminbird Wide One Deep Install Manual preview
Wide One Deep
Brand: Humminbird Pages: 20
Humminbird TCR 101 Operation Manual preview
TCR 101
Brand: Humminbird Pages: 16
Humminbird Wide 128 Operation Manual preview
Wide 128
Brand: Humminbird Pages: 24
Humminbird Wide Optic Operation Manual preview
Wide Optic
Brand: Humminbird Pages: 32
Humminbird Wide Portrait Operation Manual preview
Wide Portrait
Brand: Humminbird Pages: 41
Humminbird Wide 2000 Operation Manual preview
Wide 2000
Brand: Humminbird Pages: 41

Brands by name

Popular brands

Load more brands