Lowrance LCX-104C Operation Instructions Manual Download Page 105 | Manualshive

Page: 105 / 200

background image

97

NOTE:

Remember, when the Speed, Track and Position information dis-
plays are flashing, satellite lock has not been achieved and no posi-
tion fix has been determined. A question mark will also flash on the
present position arrow in the center of the compass rose.

Speed (ground speed) is the velocity you are making over the ground. (If
you wish, you can customize the Speed window to display Closing
Speed instead. Closing Speed is also known as velocity made good. It's
the speed that you're making toward the waypoint. For instructions,
see the Customize Page Displays entry in Sec. 8.)

Track is the heading, or the current direction you are actually travel-
ing. Bearing is the direction of a line-of-sight from your present position
to the destination. No matter what direction you are steering, the
Bearing window shows the compass direction straight to the destina-
tion from your location at the moment. Distance shows how far it is to
the waypoint you're navigating toward.

The Off Course window shows the current cross track error. This shows
the distance you are off-course to the side of the desired course line. The
course line is an imaginary line drawn from your position when you
started navigating to the destination waypoint. The course line is shown on
the Navigation Page screen (and the Map Page screen) as a red line.

The cross track error range is shown on the compass rose as a wide,
white, corridor enclosing the course line. The outer edges of this white
corridor represent lines that show the current cross track error range.
The default for the cross track error range is 0.20 miles.

For example, if the present position symbol touches the right cross
track error line, then you are 0.20 miles to the right of the desired
course. You need to steer left to return to the desired course. You can
use the

ZIN

or

ZOUT

keys to change the cross track error range.

A circular symbol depicting your destination (waypoint) appears on the
screen as you approach the waypoint, as shown on the screen in the
following figure.

Travel Time is the time that it will take to reach your destination at
your present closing speed. (You can also customize the time window to
show Arrival Time instead. Arrival Time is the local time it will be
when you arrive at the destination, based upon your present closing
speed and track.)

«
...
103
104
105
106
107
...
»

Summary of Contents for LCX-104C









































































































































































































Reviews:

No comments

Related manuals for LCX-104C

Brand: FALCOM Pages: 28

Brand: FALCOM Pages: 30

Brand: COBAN GROUP Pages: 9

CU-08A TRACER unit

Brand: jablotron Pages: 4

CAREU U1 Lite(WR)

Brand: S&T Pages: 28

Brand: GoPass Pages: 2

Brand: SONAL TRACK Pages: 11

Brand: Tait Pages: 2

Brand: Blue Sky Network Pages: 21

HawkEye 7200A-BB2327

Brand: Blue Sky Network Pages: 27

Brand: Heathkit Pages: 30

Brand: SkyBitz Pages: 6

Brand: Accurate Technology Pages: 16

Brand: Optimus Pages: 2

Brand: Siera Wireless Pages: 74

Entrada EGM-43B

Brand: Global Navigation Pages: 1

Brand: Lowrance Pages: 16

Brand: MTM Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands