Lowrance iWAY 600C Operation Instructions Manual Download Page 67

Page: 67 / 92

Therefore, the prudent navigator will not only take ad-
vantage of all available navigation tools when traveling
to a waypoint, but will also visually check to make sure
a clear, safe path to the waypoint is always available.

Straight-line Navigation Commands

There are two basic commands used for straight-line navigation: Go To

Cursor and Go To Waypoint. The Go To Cursor command will guide

you to any spot, landscape feature or waypoint you select on the map

with the cursor arrow.
The Go To Waypoint command works with the iWAY 600 Address Book

feature. This command lets you look up waypoints you have created

and saved, then takes you to them. (This also works for commercial

Points of Interest (POIs). In fact, you can launch straight-line naviga-
tion to

anything

you can look up with the Find key.)

But before you head off into the woods on your ATV, or across the lake

in your boat, it's important that you understand the term "waypoint."

Why? To navigate back to your trailhead or boat ramp, you must first

mark the spot by making a waypoint there.

Waypoints = Contacts

If you have been creating contacts and adding them to the Address

Book in turn-by-turn mode, you already understand the waypoint con-

cept. A turn-by-turn "contact" is actually a "waypoint" in point-to-point

mode, and vice versa. The Address Book in your iWAY is essentially a

waypoint list with additional features, like places to record street ad-

dresses or phone numbers. All navigation modes in this unit share the

same Address Book for storing contacts/waypoints.

"Waypoint" is the term originally used in GPS to mark a spot. It's the

word still commonly used in all straight-line GPS navigation. A way-

point is similar to an electronic "address" based on the latitude and lon-

gitude of a position on the earth. A waypoint represents a location or

destination that you can store in the unit's memory and recall later for

navigational purposes.

Set a Waypoint

Turn on the iWAY. Wait until it locks-on to the satellites and deter-

mines your position.

Create Waypoint at Current Position

Press the

OCATION

NFORMATION

button in the upper right corner of the

screen. This calls up the Waypoint Information screen. Select

DD TO

Summary of Contents for iWAY 600C




























































































Search results

Summary of Contents for iWAY 600C

Reviews:

Related manuals for iWAY 600C

Brands by name

Popular brands

Lowrance iWAY 600C, Operation Instructions Manual

Search results

Summary of Contents for iWAY 600C

Reviews:

Related manuals for iWAY 600C

Brands by name

Popular brands