Lowrance iWAY 600C Operation Instructions Manual Download Page 83

Page: 83 / 92

FCC Compliance

This device complies with Part 15 rules. Operation is subject to the fol-

lowing two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including inter-

ference that may cause undesired operation. This equipment has been

tested and found to comply with the limits of a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference when the

equipment is operated in a residential environment.
This equipment generates, uses, and radiates radio frequency energy,

and if not installed and used in accordance with the instructions, may

cause harmful interference. However, there is no guarantee that inter-

ference will not occur. If this equipment does cause interference to ra-

dio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to correct the interference

by one of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician.

Changes or modifications not expressly approved by the manufacturer

could void the user's authority to operate the equipment.

Summary of Contents for iWAY 600C




























































































Search results

Summary of Contents for iWAY 600C

Reviews:

Related manuals for iWAY 600C

Brands by name

Popular brands

Lowrance iWAY 600C, Operation Instructions Manual

Search results

Summary of Contents for iWAY 600C

Reviews:

Related manuals for iWAY 600C

Brands by name

Popular brands