Lowrance iWAY 600C Operation Instructions Manual Download Page 72

Page: 72 / 92

Course:

The direction you should be traveling to reach your destina-

tion when you are on the original course line.

Off Course (Pos Error):

The distance (to the left or to the right) from

the course line.
Steer so your Track, Bearing and Course match, and you will be headed

straight for your destination along your original course.

Navigating With Trails

Displaying and editing trails are discussed earlier in this manual un-

der the topics Categories Drawn and My Trails. The following instruc-

tions will show you how to navigate with trails.
The Trails feature is always turned on in this unit, and it works in both

point-to-point and turn-by-turn modes. However, trails are especially

useful in off-road or marine situations. They help you retrace your

steps where no roads exist for reference.
A trail, or plot trail, is a history of the path you have taken. This travel

history is represented by a line extending from the back of the current

position arrow. As you move, the unit draws this line by recording or plot-

ting a string of trail points along your path. The iWAY's built-in memory

can save 100 trails, with up to 10,000 points recorded per trail. (The de-

fault setting is 2,000 points per trail.) When trail length exceeds the

maximum point setting, the iWAY will begin recording a trail over itself.
You can save a set of up to 100 trails in a GPS data file (*.usr file for-

mat) on the unit's hard drive. The trails can then be deleted from the

unit's memory and you can record a new set of trails to save in another

GPS data file. With a USB connection, these GPS data files can also be

backed up on a computer hard drive.

NOTE:

GPS data files, also referred to as "user files," can contain trails,

routes and the waypoints (contacts) in your Address Book. Maxi-

mum capacity per file is 1,000 waypoints, 100 routes and 100 trails.

These files can by opened by our MapCreate custom mapping soft-

ware, or by our GPS Data Manager program. These programs allow

you to view and edit GPS data on the computer screen. The GPS

Data Manager can be downloaded free from

www.lowrance.com

GPS data files containing trails can then be reloaded from the unit's

hard drive to iWAY's memory. By backing up your GPS data, you can

keep different sets of trails, routes and waypoints for different pur-

poses. For example, a substitute school bus driver could record trails of

Summary of Contents for iWAY 600C




























































































Search results

Summary of Contents for iWAY 600C

Reviews:

Related manuals for iWAY 600C

Brands by name

Popular brands

Lowrance iWAY 600C, Operation Instructions Manual

Search results

Summary of Contents for iWAY 600C

Reviews:

Related manuals for iWAY 600C

Brands by name

Popular brands