Lowrance iFINDER GO Advanced User'S Manual Download Page 72

Page: 72 / 92

This example shows the Pop-up Help message for the Go To Cursor

command, located on the Map Menu in Advanced Mode.

Reset Options

To reset all features to their factory defaults:

In Advanced Mode

1. Press

MENU

↓

YSTEM

ETUP

ENT

↓

ESET

PTIONS

ENT

←

ENT

In Easy Mode

Hold down the

PAGES

key while you press

PWR

to turn the unit on.

NOTE:

Reset Options does

not

erase any waypoints, routes, icons or plot trails.

Advanced Mode's Reset Options command.

Require WAAS

You can force iFINDER to require WAAS for reporting a valid position.
(The default setting, off, uses WAAS automatically, but doesn't require
it to yield a position.) Here's how to turn it on and off in Advanced Mode.

1. Press

MENU

↓

GPS S

ETUP

ENT

↓

EQUIRE

WAAS

ENT

2. To return to the last page displayed, press

EXIT

3. You can return to this command and press

ENT

again to turn the fea-

ture off.

Summary of Contents for iFINDER GO




























































































Search results

Summary of Contents for iFINDER GO

Reviews:

Related manuals for iFINDER GO

Brands by name

Popular brands

Lowrance iFINDER GO, Advanced User'S Manual

Search results

Summary of Contents for iFINDER GO

Reviews:

Related manuals for iFINDER GO

Brands by name

Popular brands