Lowrance iFINDER GO Advanced User'S Manual Download Page 56

Page: 56 / 92

Calculating message, left, and list of the nearest waypoints, right.

4. To see location information on the closest (highlighted) waypoint, press

ENT

and the Waypoint Information screen appears. (If you wanted to, you

could select another waypoint from the list with the

↑

↓

keys.)

To navigate

to the waypoint, press press ENT. (The Go To

Waypoint command is already highlighted.) The unit will show
navigation information to the waypoint.

To find

the waypoint, press

→

IND ON

ENT

. The Map Page

appears with the cursor highlighting the found waypoint.

To clear these menus and return to the previous page, press

EXIT

repeatedly.

If you're looking by name

, there are two options:

You can

spell

out

the name in the top selection box. Press

↑

↓

to change the first

letter, then press

→

to move the cursor to the next letter and repeat until

the name is correct, then press

ENT

Jump down to the lower se-

lection list by pressing

ENT

, then press

↓

↑

to select a waypoint from

the list, then press

ENT

. The Waypoint Information screen appears.

Find By Name menu.

To navigate

to the waypoint, press

ENT

. (The Go To Waypoint

command is already highlighted.) The unit will show navigation in-
formation to the waypoint.

Summary of Contents for iFINDER GO




























































































Search results

Summary of Contents for iFINDER GO

Reviews:

Related manuals for iFINDER GO

Brands by name

Popular brands

Lowrance iFINDER GO, Advanced User'S Manual

Search results

Summary of Contents for iFINDER GO

Reviews:

Related manuals for iFINDER GO

Brands by name

Popular brands