Lowrance iFINDER Expedition C Operation Instructions Manual Download Page 23

Page: 23 / 144

Remove an MMC Card.

4. Drag the MMC from the slot into the battery compartment.

5. Turn the iFINDER face up and give it a shake to dump the MMC
into your hand or onto a work surface.

To add an MMC or SDC

1. Remove battery compartment cover.

2. Remove batteries, if present.

3. Hold unit facedown in right hand. Drop the MMC card into the slot,
label-up, with the notched edge toward the right.

4. Press down on the center of the label and slide the card to the right.

Add an MMC Card.

5. Turn the plastic rotating card lock until it holds the card firmly in
place with the grip parallel to the direction of the batteries.

6. Replace the batteries and battery cover.

Mapping Resources

The iFINDER Expedition



c works with FreedomMaps



, NauticPath



USA, Fishing Hot Spots



Elite, LakeMaster



ProMaps and Navionics



charts.

FreedomMaps are pre-made custom maps that cover multiple states,
provinces, countries or other geographic regions on a single memory

Summary of Contents for iFINDER Expedition C
















































































































































Search results

Summary of Contents for iFINDER Expedition C

Reviews:

Related manuals for iFINDER Expedition C

Brands by name

Popular brands

Lowrance iFINDER Expedition C, Operation Instructions Manual

Search results

Summary of Contents for iFINDER Expedition C

Reviews:

Related manuals for iFINDER Expedition C

Brands by name

Popular brands