82
To start a new scouting session:
1. From the Map page, press
MENU
|
↓
to
S
COUTING
|
ENT
|
ENT
.
2. If you have not created a scout plot before, highlight New Scout and
press
ENT
. Scout 1 will appear in the scout plot list below. Select Scout
1 and Press
ENT
.
Scout Plot menus.
3. The Scout menu appears. To make the scout active, highlight
A
CTIVE
and press
ENT
, then scroll down to
S
COUT
E
ND
and press
ENT
. The Edit
Scout points menu will appear. Select
A
DD FROM
M
AP
and press
ENT
.
An active scouting session (left), denoted by the checkbox next to Ac-
tive. Scout end selected on Scout menu (center). Add from Map high-
lighted on the Edit Scout points menu (right).
4. As you walk the perimeter of the area you are scouting, you will rec-
ord a series of scouting waypoints that will be used to draw the scout
plot boundary. You need to set enough points to roughly outline the
area's corners. For example, while scouting a square soybean field you
could record the field boundary by setting just four points.
To set the first point, press
ENT
and the new waypoint menu appears.
Choose a point and press
ENT
. The New Waypoint Name box will ap-
pear with a list of waypoint symbols. Select the desired icon and press
ENT
. The New Waypoint Name window will appear with
S
AVE
W
AYPOINT
Summary of Contents for iFINDER Expedition C
