Lowrance iFINDER Expedition C Operation Instructions Manual Download Page 102

Page: 102 / 144

Pop-up Help message for the Screen command.

Reset Options

In Advanced Mode

1. Press

MENU

↓

YSTEM

ETUP

ENT

↓

ESET

PTIONS

ENT

←

ENT

In Easy Mode

Hold down the

PAGES

key while you press

PWR

to turn the unit on.

NOTE:

Reset Options does

not

erase any waypoints, routes, icons or plot trails.

Advanced Mode's Reset Options command (left)

and the Reset Options Menu (right).

Screen Contrast and Brightness

Screen adjustments work the same in both Easy and Advanced Mode,
but you access the command differently in each mode.

In Easy Mode, press

MENU

↓

CREEN

ENT

In Advanced Mode, press

MENU

ENT

To adjust the display's contrast:

1. After accessing the screen menu, the

ONTRAST

slider bar will already

be highlighted. Press

←

→

to adjust the contrast.

Summary of Contents for iFINDER Expedition C
















































































































































Search results

Summary of Contents for iFINDER Expedition C

Reviews:

Related manuals for iFINDER Expedition C

Brands by name

Popular brands

Lowrance iFINDER Expedition C, Operation Instructions Manual

Search results

Summary of Contents for iFINDER Expedition C

Reviews:

Related manuals for iFINDER Expedition C

Brands by name

Popular brands