Lowrance HDS Gen3 Polaris Operator'S Manual Download Page 52

Page: 52 / 96

Video

The video function allows you to view videos or camera sources on
your system.

Note:

The video images are not shared from the Ethernet

network. You can only view the video on the unit
connected to the video source.

The Video panel

A video panel can be set up as a single panel, or as one of the
panels on a multiple panel page.
The video image is proportionally scaled to fit into the video panel.
Areas not covered by the image are colored black.

Setting up the video panel

Video source

HDS Gen3 Polaris supports one video input channel.

Video standard

HDS Gen3 Polaris supports NTSC and PAL video. Check the local
video standard or the standard of your cameras.

Adjusting the video image

You can optimize the video display by adjusting the video image
settings. Default for all settings: 50%.

Video

| HDS Gen3 Polaris Operator Manual

Summary of Contents for HDS Gen3 Polaris

































































































Search results

Summary of Contents for HDS Gen3 Polaris

Reviews:

Related manuals for HDS Gen3 Polaris

Brands by name

Popular brands

Lowrance HDS Gen3 Polaris, Operator'S Manual

Search results

Summary of Contents for HDS Gen3 Polaris

Reviews:

Related manuals for HDS Gen3 Polaris

Brands by name

Popular brands