Lowrance HDS Gen3 Polaris Operator'S Manual Download Page 40

Page: 40 / 96

Moving a waypoint

Select the waypoint you want to move

- The waypoint icon expands to indicate that it is active

Activate the menu and select the waypoint in the menu

Select the move option

Select the new waypoint position

Press the

Enter

key to confirm the new position.

The waypoint is now automatically saved at the new position.

Edit a waypoint

You can edit all information about a waypoint from the

Edit

Waypoint

dialog.

This dialog is activated by selecting the waypoint's pop-up, or from
the menu when the waypoint is activated.
The dialog can also be accessed from the Waypoints tool on the

Home

page.

Waypoint alarm settings

You can set an alarm radius for each individual waypoint you create.
The alarm is set in the

Edit Waypoint

dialog.

Note:

The waypoint radius alarm must be toggled ON in

the alarm panel to activate an alarm when your vehicle
comes within the defined radius.

Waypoints, Routes and Trails

| HDS Gen3 Polaris

Operator Manual

Summary of Contents for HDS Gen3 Polaris

































































































Search results

Summary of Contents for HDS Gen3 Polaris

Reviews:

Related manuals for HDS Gen3 Polaris

Brands by name

Popular brands

Lowrance HDS Gen3 Polaris, Operator'S Manual

Search results

Summary of Contents for HDS Gen3 Polaris

Reviews:

Related manuals for HDS Gen3 Polaris

Brands by name

Popular brands