Lowrance HDS Gen3 Polaris Operator'S Manual Download Page 4

Page: 4 / 96

Warning:

Used when it is necessary to warn

personnel that they should proceed carefully to
prevent risk of injury and/or damage to equipment/
personnel.

Manual version

This manual is written for the HDS Gen3 Polaris software version 1.5.

Viewing the manual on the screen

The pdf viewer included in the HDS Gen3 Polaris makes it possible
to read the manuals and other pdf files on the screen. .
The pdf files can be read from a card inserted in the card reader or
copied to the unit’s internal memory.

Use the menu options or the keys and on-screen buttons to
maneuver in the pdf file as described below:

Search, Goto
page, Page Up
and Down

Select the relevant panel button.

Preface

| HDS Gen3 Polaris Operator Manual

Summary of Contents for HDS Gen3 Polaris

































































































Search results

Summary of Contents for HDS Gen3 Polaris

Reviews:

Related manuals for HDS Gen3 Polaris

Brands by name

Popular brands

Lowrance HDS Gen3 Polaris, Operator'S Manual

Search results

Summary of Contents for HDS Gen3 Polaris

Reviews:

Related manuals for HDS Gen3 Polaris

Brands by name

Popular brands