Lowrance HDS Gen3 Polaris Operator'S Manual Download Page 26

Page: 26 / 96

Confirm your changes by tapping one of the panels, selecting
the save option in the menu, or by pressing the

Enter

key.

The changes are saved to the active favorite or split page.

Data Overlay

You can have data information as overlay on a page. The
information can be any data available on the network.

Turning Data overlay on and off

You can turn overlay data on or off for any active page by selecting
the

Data overlay

icon on the

System Controls

dialog. When Data

overlay is on, an orange bar appears above the icon.

Edit overlay data

Use the

Edit overlay

option on the

System Controls

dialog to

access edit menu options to:

•

Add a new data overlay to the active panel.

•

Delete a selected data overlay.

•

Change a selected data overlay to display different data.

•

Configure a selected data overlay appearance (digital or analog,
size, and so on).

•

Re-locate an item by selecting and moving it.

Customizing your system

| HDS Gen3 Polaris Operator

Manual

Summary of Contents for HDS Gen3 Polaris

































































































Search results

Summary of Contents for HDS Gen3 Polaris

Reviews:

Related manuals for HDS Gen3 Polaris

Brands by name

Popular brands

Lowrance HDS Gen3 Polaris, Operator'S Manual

Search results

Summary of Contents for HDS Gen3 Polaris

Reviews:

Related manuals for HDS Gen3 Polaris

Brands by name

Popular brands