Lowrance GlobalMap 5300C iGPS Operation Instructions Manual Download Page 95

Page: 95 / 172

Map page shown in North Up mode (left) Map page shown in Track Up

mode (right).

To change map orientation:

1. From the Map Page, press

MENU

↓

RIENTATION

ENT

2. Use

↑

↓

to select the desired mode, then press

ENT

3. Press

EXIT

to return to the map page display.

Map Orientation menu with

the North Up map orientation option selected.

NOTE

In North Up and Course Up, the present position arrow appears in

the center of the map page. In Track Up, the position arrow ap-

pears centered in the lower third of the page.

NauticPath

™

USA Marine Charts

Your unit can display NauticPath electronic charts on MMCs. They

work just like a MapCreate custom map on a MMC.

In Track Up mode, map shows "N" and arrow to indicate north.

www.Busse-Yachtshop.de email: [email protected]

Summary of Contents for GlobalMap 5300C iGPS












































































































































































Search results

Summary of Contents for GlobalMap 5300C iGPS

Reviews:

Related manuals for GlobalMap 5300C iGPS

Brands by name

Popular brands

Lowrance GlobalMap 5300C iGPS, Operation Instructions Manual

Search results

Summary of Contents for GlobalMap 5300C iGPS

Reviews:

Related manuals for GlobalMap 5300C iGPS

Brands by name

Popular brands