Lowrance GlobalMap 5300C iGPS Operation Instructions Manual Download Page 116

Page: 116 / 172

108

Transparency selected on main menu. Transparency slider bar (right).

To adjust Transparency level:

1. Press

MENU

↓

RANSPARENCY

ENT

. The

RANSPARENCY

slider

bar appears.
2. Use

↑

↓

to move the bar. Move the bar to the bottom of the scale to

eliminate transparency. Moving the bar to the top of the scale will pro-

vide the greatest level of transparency.
3. Press

EXIT

to return to the map display.

Units of Measure

This menu sets the speed and distance (statute or nautical miles, me-

ters), depth (feet, fathoms, or meters), temperature (degrees Fahren-

heit or Celsius) and heading (true or magnetic) units.

To change Units of Measure:
To set Speed/Distance:

1. Press

MENU

, select System Setup and press

ENT

NITS OF

EAS-

URE

will be highlighted, so press

ENT

2. Speed/Distance will be highlighted. Press

ENT

3. Use

↑

↓

to select one of the following options: Statute, Nautical or

Metric. Press

ENT

4. Press

EXIT

repeatedly to return to the sonar display.

www.Busse-Yachtshop.de email: [email protected]

Summary of Contents for GlobalMap 5300C iGPS












































































































































































Search results

Summary of Contents for GlobalMap 5300C iGPS

Reviews:

Related manuals for GlobalMap 5300C iGPS

Brands by name

Popular brands

Lowrance GlobalMap 5300C iGPS, Operation Instructions Manual

Search results

Summary of Contents for GlobalMap 5300C iGPS

Reviews:

Related manuals for GlobalMap 5300C iGPS

Brands by name

Popular brands