Lowrance GlobalMap 5300C iGPS Operation Instructions Manual Download Page 83

Page: 83 / 172

MMC File Browser.

Check MMC Files and Storage Space

To check MMC Files:
Press

MENU

↓

ROWSE

MMC

ILES

ENT.

Communications Port Configuration

The unit has one NMEA 0183 version 2.0 compatible communication

port, or com port for short. The Com Port Menu, which is accessed from

the System Setup Menu, allows you to configure the communications

port to send or receive data from another electronic device, such as an

autopilot. The com port can be used for either NMEA, or SiRF Binary

data transfer.

Communications Port highlighted on System Setup menu (left). Baud

Rate selected on Communications Port menu (right).

www.Busse-Yachtshop.de email: [email protected]

Summary of Contents for GlobalMap 5300C iGPS












































































































































































Search results

Summary of Contents for GlobalMap 5300C iGPS

Reviews:

Lowrance GlobalMap 5300C iGPS, Operation Instructions Manual, Page: 83 / 172

Search results

Summary of Contents for GlobalMap 5300C iGPS

Reviews: