Lowrance GlobalMap 5300C iGPS Operation Instructions Manual Download Page 112

Page: 112 / 172

104

Track Smoothing

This is a factory setting on the GPS Setup menu that

should always be

left on

. When stopped or traveling at slow speeds (such as walking or

trolling), Track Smoothing prevents wandering of trails, the steering

arrow, compass rose and a map in track-up mode.

Trail Options

There are several options you can use with trails. Some affect all trails,

other options can be applied to a particular trail. You can change the

way trails are updated, display or hide trails, create a new trail, delete

a trail and edit a trail's name, color, pattern and visibility.

The Trails Menu.

To create a New Trail:

1. Press

MENU

, highlight

RAILS

and press

ENT

2. Highlight

RAIL

and press

ENT

. The Edit Trail menu will appear,

allowing you to Edit the trails name, color, pattern, maximum points,

trail status (active or inactive) and trail visibility. You can also navi-

gate the trail or delete the trail.

www.Busse-Yachtshop.de email: [email protected]

Summary of Contents for GlobalMap 5300C iGPS












































































































































































Search results

Summary of Contents for GlobalMap 5300C iGPS

Reviews:

Related manuals for GlobalMap 5300C iGPS

Brands by name

Popular brands

Lowrance GlobalMap 5300C iGPS, Operation Instructions Manual

Search results

Summary of Contents for GlobalMap 5300C iGPS

Reviews:

Related manuals for GlobalMap 5300C iGPS

Brands by name

Popular brands