Lowrance GlobalMap 5200C GPS Operation Instructions Manual Download Page 124

Page: 124 / 164

118

Waypoint Information screens with the Go To Waypoint command se-

lected, left, and the Find on Map command selected, right.

To clear these menus and return to the previous page, press

EXIT

re-

peatedly.
5.

If you're looking

by name

, there are two options:

You can

spell

out

the name in the top selection box. Press

↑

↓

to change the first

letter, then press

→

to move the cursor to the next letter and repeat

until the name is correct, then press

ENT

Or you can jump down to the lower selection list by pressing

ENT

then press

↓

↑

to select a waypoint from the list, then press

ENT

. The

waypoint information screen appears.

Find By Name menu, left. Waypoint Information screen, center. At right,

the found waypoint is highlighted by the cursor on the Map Page.

To navigate

to the waypoint, press

ENT

. Go To Waypoint command

is already highlighted. The unit will show navigation information to

the waypoint.
B.

To find

the waypoint, press

↓

IND

ENT

. The Map Page

appears with the cursor highlighting the found waypoint.

www.Busse-Yachtshop.de email: [email protected]

Summary of Contents for GlobalMap 5200C GPS




































































































































































Search results

Summary of Contents for GlobalMap 5200C GPS

Reviews:

Related manuals for GlobalMap 5200C GPS

Brands by name

Popular brands

Lowrance GlobalMap 5200C GPS, Operation Instructions Manual

Search results

Summary of Contents for GlobalMap 5200C GPS

Reviews:

Related manuals for GlobalMap 5200C GPS

Brands by name

Popular brands