Lowrance GlobalMap 5200C GPS Operation Instructions Manual Download Page 43

Page: 43 / 164

The Map Page has its own menu, which is used for several functions

and for setting various options. To access the Map Page Menu, from the

Map Page, press

MENU

The Pages Menu also offers several map display options under the Map

Page category. To access them, press

PAGES

while the unit is on the

Map Page. The two different menus are shown in the following figures.

The Map Page Menu is shown at left. The Pages Menu is shown at

right.

These two figures, the Digital Data map page (left) and the Two Posi-

tion Formats map page (right), are features found in the Pages Menu.

Resize Window command

In pages that have two major windows (such as Two Maps) you can

toggle back and forth between the two windows by pressing

PAGES

. This allows you to change which map your cursor

moves on and which map the menu operates on. A black title bar de-

notes the active window.

www.Busse-Yachtshop.de email: [email protected]

Summary of Contents for GlobalMap 5200C GPS




































































































































































Search results

Summary of Contents for GlobalMap 5200C GPS

Reviews:

Related manuals for GlobalMap 5200C GPS

Brands by name

Popular brands

Lowrance GlobalMap 5200C GPS, Operation Instructions Manual

Search results

Summary of Contents for GlobalMap 5200C GPS

Reviews:

Related manuals for GlobalMap 5200C GPS

Brands by name

Popular brands