Lowrance GlobalMap 5200C GPS Operation Instructions Manual Download Page 54

Page: 54 / 164

2. Center the cursor over the location to select it. See the example in

the following figure. Many map items such as waypoints, Points of In-

terest, towns, etc. can be "selected," and appear "highlighted" with a

pop-up box. Other features, such as a river or a street intersection will

not appear "highlighted," but the cursor will take you to those locations

just the same.
3. Press

MENU

ENT

and the unit will begin navigating to the cursor

location.

Navigate to cursor. In this example, the cursor has selected

the town of Oologah, Oklahoma.

The Map Page will display a dotted line from your current position to

the cursor position. The Navigation Page displays a compass rose show-

ing navigation information to your destination. See the following ex-

amples.

The 15-mile zoom figure at left clearly shows the dotted course line

connecting your current position to your destination. The 40-mile

zoom, center, shows both current position and destination on screen.

The Navigation Page, right, will also show navigation information.

www.Busse-Yachtshop.de email: [email protected]

Summary of Contents for GlobalMap 5200C GPS




































































































































































Search results

Summary of Contents for GlobalMap 5200C GPS

Reviews:

Lowrance GlobalMap 5200C GPS, Operation Instructions Manual, Page: 54 / 164

Search results

Summary of Contents for GlobalMap 5200C GPS

Reviews: