Lowrance GlobalMap 5200C GPS Operation Instructions Manual Download Page 121

Page: 121 / 164

115

At left, the Find Streets menu with the Find First

Street command highlighted. At right, Streets Found list.

4. The Map Page appears, with the cursor pointing to the found street.

If you want to navigate to the found street at the cursor location, press

MENU

ENT

EXIT

Map Page showing results of a street search.

The cursor points to the located street.

Find an Intersection

You must enter one street in the First Street dialog box and enter the

next street in the Second Street dialog box.
1. From the Map Page, press

MENU

↓

IND

TREETS

ENT

and the Find

Streets Menu appears.
2. You must fill in a street name in the First Street dialog box. Press

ENT

to display the Find By Name menu. There are two options:

You

can

spell out

the street in the top selection box. Press

↑

↓

to change

the first letter, then press

→

to move the cursor to the next letter and

www.Busse-Yachtshop.de email: [email protected]

Summary of Contents for GlobalMap 5200C GPS




































































































































































Search results

Summary of Contents for GlobalMap 5200C GPS

Reviews:

Related manuals for GlobalMap 5200C GPS

Brands by name

Popular brands

Lowrance GlobalMap 5200C GPS, Operation Instructions Manual

Search results

Summary of Contents for GlobalMap 5200C GPS

Reviews:

Related manuals for GlobalMap 5200C GPS

Brands by name

Popular brands